Quick answer
If you want a composite fence in Vancouver that doesn’t sag, lean, or fight you every time you open the gate, you need a complete system: engineered posts, matching panel kits, and properly framed composite gates with the right hardware. At Maple Star Fencing, we use our own composite line posts, panel sets, and custom gates to build full systems that stand up to Metro Vancouver’s rainy climate for the long term.
If you’re still at the research stage, you can also check our main hub:
Composite Fencing Metro Vancouver
What is a “complete” composite fence system?
A real composite fencing Vancouver system isn’t just nice boards in the ground. It includes:
Structural posts – usually powder-coated aluminium, set in concrete or on anchor bases
Rails / channels – that hold composite boards securely
Panel kits – pre-planned sets sized for typical bays (e.g. 6×6 ft)
Gates & hardware – framed properly and built to match the fence
Caps & trims – to finish everything cleanly
If any one part is underbuilt—especially posts and gates—the fence will feel cheap or start failing early, even if you paid for top-tier composite boards.
We design systems around our own product family, including:
So everything is designed to fit together from day one.
Composite Fence Gates & Posts VancouverWhy posts & gates are the first thing we think about (not the last)
Across Vancouver, Burnaby, Coquitlam, Surrey, Richmond and the rest of Metro Vancouver, most fences we tear out didn’t die because of the boards. They failed because:
Posts rotted at ground level or were too shallow
Gates sagged, dragged, or twisted until nobody wanted to touch them
Hardware and framing were never sized for wet, heavy conditions
Our local realities:
Long, wet winters and “Raincouver” soil that holds moisture
Shady side yards that never fully dry
Laneway traffic constantly pulling on gates and posts
That’s why, as a composite fence company Vancouver homeowners call when they’re tired of fixing the same problems, we always:
Design the post and footing plan first
Design gate openings and structure second
Drop in the composite fence panels and style choices third
Boards should be the finish, not the foundation.
Composite fence posts – the backbone of your fence
For most projects, our main structural line post is the
Two-Sided Composite Fence Line Post.
Why we like this post in Vancouver
Heavy-gauge aluminium – won’t rot in wet soil
Two-sided channels – boards lock in neatly on both sides
Clean, modern profile that matches today’s homes
Works across long runs and shared property lines
On a typical composite fencing Vancouver job, we’ll use:
Two-sided line posts along straight sections
Specialised corner/end/gate posts at transitions and openings
Concrete footings sized to your fence height, exposure, and soil type
Can you reuse old wood posts?
You can, but we almost never recommend it:
Rot at grade is often hidden until it’s too late
Old spacing may not match composite panel bay sizes
You’re placing a long-life product on a questionable foundation
If you’re investing in composite, it makes sense to do posts properly once.
Composite fence panels that match your posts
Once the structural plan is set, we plug in the right panel kits.
For most side and backyard runs, our workhorse kit is:
Each kit is designed for a 6 ft high × ~6 ft wide privacy bay and includes:
Composite boards
An aluminium post
Top/bottom channels
Required connectors
You repeat these bays to create clean, modular runs that:
Fit perfectly with our Two-Sided Composite Fence Line Post
Match your gates in colour and profile
Scale from a short side yard to long shared boundaries
When you’re on concrete or retaining walls
For decks, concrete patios, and on-wall applications, we switch to:
These use structural anchor bases to mount posts on concrete instead of in the ground—perfect for:
Raised deck privacy screens
Retaining wall top fences
Courtyard and rooftop dividers
Anchor-base panels then tie back into standard 6×6 in-ground panels so your fence reads as one continuous system, not a patchwork.
Design upgrades with mixed colours
If you want a more designer look, we often incorporate:
Charcoal + walnut or other combos break up long runs and give you a custom, high-end feel while still using the same post and gate structure.
Composite fence gates – the most abused part of the system
Gates take the most punishment: kids, deliveries, pets, lane traffic, wind. Treating them as “just another panel with hinges” is why so many gates fail.
We build gates around:
What makes our composite gates different
Custom widths up to 4 ft – built to the actual opening, not whatever was in stock
Rigid aluminium frames – composite boards are infill, not structure
Matching profiles and colours to your main fence panels
Proper hinge selection (adjustable, self-closing where needed)
Smart latch and drop-bolt placement so they’re easy to use every day
We also pay close attention to:
Bottom clearance (so gates don’t drag on pavers, turf, or snow)
Side gaps (tight enough for pets, loose enough to swing smoothly)
Stronger gate posts and bracing at high-use locations
This is where an experienced composite fence contractor Vancouver team really earns its keep.
How the full system works together on a real property
A typical full system for a Metro Vancouver home might look like this:
Site visit & layout
Walk property lines and confirm heights
Decide exact gate locations and widths
Identify where in-ground vs anchor-base posts are needed
Utilities & compliance
Arrange BC 1 Call locates before digging
Double-check typical fence height rules for your city or strata
Post plan
In-ground Two-Sided Composite Fence Line Post – Metro Vancouver along grass and soil
Anchor-base posts with
Standard 6×6 Ft Composite Fence Panels with Anchor Base – Metro Vancouver on decks and wallsHeavier posts and extra concrete at all gate openings
Panel installation
Main privacy sections with
Standard 6×6 Composite Fence Panels BC | MapleStar FencingFeature sections with
Mixed Colour Composite Fence Panels Vancouver near patios or entries
Gate build
Side yard and lane gates built from
Composite Fence Gates – Custom Widths up to 4 ft (Metro Vancouver)Hardware sized and tuned for real-world use
Finishing & hand-off
Post caps, trims, and final alignment checks
Jobsite clean-up and basic care instructions
Laneway system upgrade
Location: Vancouver laneway home (older cedar fence replacement)
Original issues:
Mixed posts and DIY repairs
Two gates dragging into the lane, one no longer closing properly
Patchwork look: some stained cedar, some raw, some wire
What we installed:
Full structural reset with
Two-Sided Composite Fence Line Post – Metro Vancouver along the laneContinuous privacy run using
Standard 6×6 Composite Fence Panels BC | MapleStar FencingLane and side gates rebuilt with
Composite Fence Gates – Custom Widths up to 4 ft (Metro Vancouver)
Result:
The owners now have a straight, modern composite fence line that:
Works as a single engineered system
Has gates that close effortlessly instead of dragging
Only needs occasional rinsing instead of ongoing wood repairs
That’s the kind of structural, system-based approach Google and homeowners both look for when they search “composite fence installers near me” and “composite fence company Vancouver”.
DIY vs pro: when to handle posts & gates yourself
DIY may make sense if:
You’re comfortable setting posts and working with concrete
You’re using a small number of
Standard 6×6 Composite Fence Panels BC | MapleStar Fencing in a simple runYou don’t mind taking your time with layout and adjustments
Hiring a pro composite fence contractor Vancouver home-owners trust is smarter if:
You have slopes, retaining walls, or tight urban lanes
You’re dealing with multiple gates and shared property lines
You’re part of a strata or townhouse complex that needs a clean, uniform look
You don’t want to risk hitting utilities or mis-setting posts
Labour is only part of the equation. Fixing a poorly built gate or line of posts is almost always more expensive than doing it right once.
FAQs – Composite Fence Gates & Posts Vancouver
1. Can I buy Maple Star posts and gates without installation?
Yes. All of the products mentioned here—
Two-Sided Composite Fence Line Post,
Standard 6×6 Composite Fence Panels BC,
Standard 6×6 Ft Composite Fence Panels with Anchor Base, and
Composite Fence Gates – Custom Widths up to 4 ft
—can be supplied “materials only” for DIY or contractors.
2. Do I really need special posts for composite fencing?
Practically, yes. Composite and mixed-colour panels are heavier than most wood fences, and Vancouver’s wet soil is unforgiving. Structural aluminium posts with proper footings give the system the backbone it needs to last.
3. How wide can a composite gate be?
Our Composite Fence Gates – Custom Widths up to 4 ft are ideal for most walk-through gates. Wider openings (e.g. driveways) are usually handled with two leaves and drop bolts, or with a different structural solution. We’ll design based on how you actually use the space.
4. Can I mount composite fence posts on my deck or retaining wall?
Yes. That’s exactly what
Standard 6×6 Ft Composite Fence Panels with Anchor Base
are designed for. We’ll check your structure and suggest the safest way to mount posts.
5. Will my composite gate sag over time?
A properly framed and installed gate should not. We use rigid aluminium frames, heavier gate posts, and the right hardware. That’s why we don’t treat gates as cut-down panels—they are engineered parts of the system.
6. Can I mix standard and mixed-colour panels in the same fence?
Absolutely. Many homeowners use
Standard 6×6 Composite Fence Panels BC
for most of the yard and add
Mixed Colour Composite Fence Panels
for feature sections near patios, hot tubs, or entries.
7. Do you only install composite fence gates & posts in Vancouver?
No. Our installation crews work across Metro Vancouver, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, Port Coquitlam, Port Moody, New Westminster, North Vancouver, West Vancouver, Delta, Langley, Maple Ridge, Pitt Meadows, and White Rock.
8. How do I get a quote for a complete system?
Send us a few photos and rough measurements, or book a site visit. Tell us you’re interested in a “Composite Fence Gates & Posts – Complete System” and we’ll design around the exact mix of posts, panel kits, and gates you need.
Ready to plan your composite fence system?
Whether you’re a homeowner, builder, or strata, Maple Star Fencing can design a complete composite fence system that ties posts, panels, and gates together from day one.
Call or text Maple Star Fencing: (778) 318-8578
Or request a quote on our website and mention this Composite Fence Gates & Posts Vancouver guide
We’ll give you a clear, system-based plan so you’re not guessing which parts go together—and you end up with a fence that looks and works like it was built as one.
