Composite Fencing Burnaby – Durable, Low-Maintenance Yard Privacy

Composite fencing in Burnaby gives you a modern, private fence that doesn’t rot, warp, or need constant staining in our rainy Lower Mainland climate. With Maple Star Fencing’s current promotion, qualifying composite fence projects in Burnaby can start around $60–$80 per linear foot, making it one of the best-value long-term upgrades for your yard or strata.

What is composite fencing?

Composite fencing is built from a blend of recycled wood fibres and high-density plastic. The boards lock into posts to form solid panels that:

• Look like wood

• Resist rot, moisture, and insects

• Don’t need painting or staining

For composite fencing Burnaby homeowners, it’s essentially “wood look, low-maintenance lifestyle.” We use the same proven systems we install on composite fencing Vancouver and Composite Fence Panels Vancouver projects, so you’re getting a product that’s already working in real Metro Vancouver yards.

Quick facts – composite fencing in Burnaby

• Best for: Backyards, side yards, laneways, pool areas, along busy roads

• Typical height: 5–6 ft in rear/side yards (confirm City of Burnaby bylaws + any strata rules)

• Lifespan: Often 20+ years with basic care

• Maintenance: Rinse with water and mild soap; no re-staining or repainting

• Typical market pricing: Many Metro Vancouver composite fences fall in the $120–$180+ per linear foot range for a standard 6 ft fence on a fairly level, accessible lot

• Current Maple Star promo: Qualifying composite fencing projects in Burnaby from about $60–$80 per linear foot (limited-time, project-specific)

• Climate match: Designed for wet, coastal conditions like Burnaby, New Westminster, and East Vancouver

Pricing disclaimer: All figures are rough planning ranges in CAD. Final pricing depends on design, access, slope, and site conditions, and is confirmed only after an on-site visit and written quote.

Why composite fencing is perfect for Burnaby yards

Burnaby sees a lot of rain, clay soil, and shaded yards under big trees. Traditional wood fences often:

• Rot faster along the bottom

• Lean or heave in soft or sloped ground

• Peel, flake, or fade unevenly

• Turn into a patchwork of “repair jobs” over time

Upgrading to composite fencing Burnaby helps fix all of that:

• Moisture resistance: Composite boards are engineered for damp soil and long rainy seasons.

• Stable and straight: Less warping and twisting than many cedar fences.

• Colour built in: The colour is part of the board, not a coating that peels off.

• Consistent appearance: The fence looks tidy from day one and stays that way with basic cleaning.

From North Burnaby and Capitol Hill to Metrotown, Deer Lake, and Edmonds, our composite systems are designed for real Burnaby yards, not just brochure photos.

If you are comparing panel style, gate placement, old fence removal or installation scope, our Burnaby fence installation quote page explains what photos and project details to send before requesting a written estimate.

Pros and cons of composite fencing (Burnaby version)

Pros

• Very low maintenance: No yearly staining or scraping

• Long-term value: Higher upfront cost, fewer repair surprises

• Modern look: Clean lines that complement newer siding and windows

• Solid privacy: Tight boards with no gaps – ideal along laneways and townhome yards

• Kid & pet friendly: Smooth surfaces, no splinters

• Eco-conscious: Many composite products use recycled material

Cons

• Higher initial investment: Upfront cost is more than basic cedar

• Heavier materials: Posts and concrete footings must be installed correctly

• Fixed colour: You can’t just re-stain to a trendy colour later

• Less rustic: Composite looks more modern and refined than rough-cut, knotty wood

Pricing in more detail – and our Burnaby promo

To keep things transparent:

• Typical market pricing: Many Metro Vancouver composite fences fall in the $120–$180+ per linear foot range for a standard 6 ft fence on a fairly level, accessible lot.
• MapleStar pricing: $60–$80 per linear foot installed in Burnaby — the panels come factory-direct rather than through a distributor, and the modular system installs faster than framing every section on site. Gates, slope, old fence removal and difficult access still move the number.

This promo is ideal for:

• Full yard replacements (front + back)

• Long laneway runs

• Strata/townhome perimeter upgrades

Important: Final pricing is always project-specific. Access, demolition, slopes, rock, retaining walls, and custom gates all affect the final number. We always confirm your price after an on-site visit and give you a clear written quote before work starts.

Design options – composite fencing Burnaby homeowners actually choose

As a local installer and composite fencing company Vancouver & Burnaby, we see a few designs that work best in our neighbourhoods:

1. Full privacy panels

• 6 ft high, solid composite panels

• Great for small Burnaby backyards backing onto alleys, rentals, or commercial properties

• Ideal if you want maximum privacy and less visual clutter

2. Horizontal slat composite

• Modern “West Coast” look

• Pairs nicely with Hardie board, stucco, black trim, and contemporary decks

• Popular in newer areas around Brentwood, Metrotown, and The Heights

3. Mixed materials (composite + metal)

• Composite boards with steel or aluminium posts

• Extra strength on long or exposed runs

• A more architectural look for corner lots or upscale townhome developments

4. Colour families that work in Burnaby

• Charcoal / deep grey: Hides dirt and road dust; sharp with black or dark window frames

• Warm browns: Cozy, wood-inspired without the ongoing staining chores

• Driftwood grey: Great near greenbelts, parks, and more natural landscapes

Because we do a lot of Composite Fence Panels Vancouver work, we can keep your Burnaby project consistent with broader Metro Vancouver design trends—helpful if you’re thinking about resale.

Step-by-step: our composite fence install process in Burnaby

Here’s how a typical project with Maple Star Fencing runs:

1. Quick call or online request

   • You share your address, a rough idea of fence length, and what you want: more privacy, better curb appeal, secure dogs, etc.

2. On-site visit & measurement

   • We walk your fence lines, measure accurately, and look for slopes, trees, retaining walls, and drainage issues.

3. Bylaw & property line checks

   • We discuss typical fence heights and remind you to confirm with the City of Burnaby and, if applicable, your strata.

   • If boundaries seem unclear, we may suggest talking to a surveyor.

4. Utility locate (safety first)

   • Before digging, BC’s “call before you dig” service should mark underground gas, hydro, and communication lines. This is vital for safety and compliance.

5. Written quote

   • You get a clear, written proposal outlining materials, labour, demolition/disposal of your old fence (if needed), gates, and any extras.

6. Installation

   • Old fence removal and haul-away (if included)

   • Post holes dug to correct depth for local frost and soil conditions

   • Posts set in concrete, aligned and level

   • Composite boards or panels installed, trimmed, and capped

   • Gates hung, adjusted, and tested

7. Final walkthrough & clean-up

   • We walk the fence with you, handle any small tweaks, and leave your yard tidy.

8. Warranty & care tips

   • We review product and workmanship coverage and show you how to keep your composite fence clean with minimal effort.

Special section: composite fencing for Burnaby developers & townhome projects

Composite fencing isn’t just for single-family homes. It’s a great upgrade for townhome, duplex, and small multi-family projects in Burnaby.

For Burnaby developers & builders

If you’re planning or building a townhome project in areas like Metrotown, Brentwood, or Edmonds:

• We can review your site plans and grading

• Recommend composite fence systems that match your architecture and buyer expectations

• Standardise height, colour, and style so the future strata has a clear, low-maintenance fence standard

• Supply and install composite systems similar to our Composite Fence Panels Vancouver installs, giving your projects a consistent, premium look

A clean, modern composite perimeter fence is a strong selling feature and reduces the future strata’s maintenance headaches.

For existing townhome stratas upgrading from wood to composite

If your current wood fence is leaning and rotting:

• We help strata councils compare long-term composite costs versus another round of wood replacement

• Provide sample boards and photos for owner information meetings

• Plan phased work (worst sections first) so budgets stay manageable

• Coordinate with your property manager to minimize disruption to parking, garbage collection, and access

Because Maple Star is a seasoned composite fencing company Vancouver & Burnaby, we understand how to work around driveways, visitor stalls, laneways, and tight timelines common to strata communities.

DIY vs hiring a pro for composite fencing in Burnaby

DIY composite fence

DIY might sound tempting if you’re handy, but you’ll need:

• An auger or post-hole digger, saws, levels, and mixing tools

• Time (and a strong back) for digging, concrete, and lifting heavy panels

• Comfort following manufacturer specs so you don’t void warranties

• Confidence working near utilities and existing structures

Mistakes with post spacing, depth, or alignment can lead to:

• Leaning fences

• Binding or sagging gates

• Panels that don’t fit or rack properly on slopes

Professional composite fencing company

With Maple Star Fencing:

• Posts are installed correctly for heavier composite loads and local conditions

• Lines stay straight, corners are clean, and gates work smoothly

• You get a single point of accountability for warranty and any adjustments

• The finished fence looks like it belongs on a real estate listing, not a “weekend experiment”

For shorter, simple runs, some homeowners still choose DIY. For full yards, laneways, townhomes, or sloped sites, a pro install usually costs less in stress and rework.

FAQs – composite fencing Burnaby

1. How long will composite fencing last in Burnaby’s climate?
With proper installation and basic cleaning, composite fences can often last 20+ years, even with our rain, clay soil, and shade.

2. Will composite fencing fade?
Quality composite products may soften slightly in colour during the first year, then stabilise. You avoid the heavy peeling and flaking you see on painted or stained wood fences.

3. Is composite fencing more expensive than cedar?
Day one, yes. Over 15–20 years, many homeowners find composite works out cheaper because there’s no regular staining and fewer major repair or replacement cycles.

4. Can composite fencing handle steep Burnaby slopes?
Yes. We can step panels or carefully follow the grade so the fence stays neat and structurally sound.

5. Do I need a fence permit in Burnaby?
Most standard backyard fences don’t require a formal permit if they meet height and location rules, but you should always confirm with the City of Burnaby and ensure you’re respecting property lines and any strata bylaws.

6. Is composite fencing good for noisy streets or laneways?
Solid composite panels help block sightlines and soften noise from traffic and alleys. They won’t create silence, but they do improve comfort and privacy.

7. How do I clean my composite fence?
Usually just a garden hose, mild soap, and a soft brush. In shady or mossy areas, we’ll recommend composite-safe cleaners if needed.

8. Can you match an existing composite fence from another Vancouver project?
Often yes, or we can propose a close match that transitions cleanly. Because we work across composite fencing Vancouver and Burnaby, we’re familiar with most of the popular systems.

Ready to upgrade to composite fencing in Burnaby?

If your fence is leaning, peeling, or constantly on your to-do list, composite fencing Burnaby might be the simplest long-term solution—especially with our current $60–$80 per linear foot promotional pricing on qualifying projects.

Maple Star Fencing is a local composite fencing company Vancouver & Burnaby homeowners, strata councils, and developers call when they want durable, low-maintenance fences that look good year after year.

👉 Next step:
Contact us for a free, no-pressure estimate. Share your address and a few photos, and we’ll help you plan a composite fence that fits your yard, your budget, and Burnaby’s climate.