Composite Fence Panels in Different Heights – BC & Metro Vancouver

Not every project is a standard 6 ft fence. Some back onto laneways, roads, or neighbours’ decks and need extra privacy and height. Our Composite Fence Panels in Different Heights let you build proper 6.5, and 8 ft composite fences using the same system shown on our main composite fence Vancouver page.

Instead of guessing, we design the right panel height and matching post length for your site anywhere in Metro Vancouver.

How the Height System Works (Per Board = 0.5 ft)

Each composite board equals half a foot (0.5 ft) of panel height, so we control total height simply by changing the number of boards:

• 6 ft panel → 12 boards
• 6.5 ft panel → 13 boards
• 8 ft panel → 16 boards

We combine these boards with our aluminium post and channel system, the same one used across our composite fence products range, to build tall composite privacy fence panels that stay straight and solid.

Posts in Different Lengths for Different Fence Heights

When you go taller, you can’t reuse a short post. This product is paired with posts in different lengths for different fence heights so every panel has the right support and footing depth.

Our system ties into the full MapleStar line:

• Standard runs with Standard 6×6 ft composite panels
• Full property builds with full set composite fence kits
• Feature areas using mixed colour composite panels

You can mix standard heights and tall sections on the same project without switching to a different fence system.

When Taller Composite Panels Make Sense

Adjustable heights are ideal for:

• Yards backing onto lanes or roads – extra height helps block headlights and noise
• Homes beside tall decks or 2-storey windows – better privacy from above
• Townhouse and strata complexes along streets or public walkways that need a consistent higher boundary; our composite fence for strata Vancouver projects often use mixed heights on different sides
• Commercial or semi-commercial yards that need more security and screening
• Sloped sites where you may step panel heights to follow grade without big gaps

If you’re ordering as a contractor through our composite fence supplier Vancouver channel, this height-flexible option makes it easy to spec the right panels and posts for more complex lots.

Why Use Composite for Tall Fences (Not Wood)

Tall wood fences tend to lean, twist, and rot faster. With composite and aluminium:

• No rot, warping, or splitting in Vancouver’s wet climate
• No painting or staining – just periodic washing
• Better structural stability when combined with correctly sized posts and footings
• Matching look across all heights, so tall and standard sections still look like one fence

You get the same low-maintenance system that defines our Maple Star Fence brand, just engineered for more height where you need it.

How Ordering Works

1. Tell us your target height and layout
   Share rough measurements, a sketch, or photos. Mention where you need 6.5–8 ft sections and where a standard height like our Standard 6×6 Ft Panels BC is enough.
2. We calculate boards, post lengths, and hardware
   Using the 0.5 ft per board rule, we size the panels and specify the right post length and footing depth for each section.
3. We check bylaws with you
   We help you review typical local fence-height rules before you finalize, then you confirm with your city or strata.
4. Choose supply-only or full installation
   • Supply-only: Order through our composite fence supplier Vancouver options if you’re a contractor or experienced DIYer.
   • Supply & install: MapleStar Fencing installs the complete system in Vancouver, Burnaby, Coquitlam, Surrey, Richmond, and all Metro Vancouver cities.
5. We bundle your order by height
   Boards, posts, and rails are grouped by fence height so your crew can install quickly with fewer mistakes on site.

Who This Product Is For

• Homeowners who need more privacy than a standard 6 ft fence
• Strata councils and property managers upgrading perimeter fences around townhome complexes and shared yards; many composite fence for strata Vancouver projects use taller sections along public edges
• Developers and builders needing tall fences on busy streets or beside lanes
• Contractors looking for a flexible composite system where they can order different panel heights and matching posts from one supplier

If you’re not sure which height is allowed or practical on your lot, we can help you choose a mix of standard panels, tall sections, and even composite wall cladding so everything looks consistent.

Ready to Plan Composite Fence Panels in Different Heights?

If you need 6.5–8 ft composite privacy fence panels with proper posts and footings in Metro Vancouver:

Call or text MapleStar Fencing at (778) 318-8578
or use the Request Quote button and mention the fence heights you’re considering.

We’ll tie this product into the rest of our fence products – including full composite fence sets, mixed-colour panels, PVC panels, and accessories – so you end up with a complete, installer-ready package for your project.