Two-Sided Composite Fence Line Post – Metro Vancouver

The two-sided composite fence line post is the main structural post used for straight runs in our composite fencing Vancouver projects. It is made from heavy-gauge aluminium and has board channels on both sides, so composite fence boards can lock in neatly on both faces of the fence.

This post is designed to integrate perfectly with MapleStar’s full range of fence products, including standard panels, full-set kits, and mixed-colour composite fences.

Where the Two-Sided Post Fits in the System

In a typical layout, this post is used as:

• A line post in the middle of straight fence runs
• A shared property line post between neighbours, where both sides see the fence
• An intermediate support between end posts, corner posts, or gate posts

It pairs with:

• Standard 6×6 ft composite fence panels on typical backyard runs
• Full set composite fence kits for complete projects including posts, boards, and hardware
• Mixed colour composite panels when you want designer charcoal and wood-tone combinations

Using this single post profile across the job keeps the whole fence line consistent and easy to install.

Key Features

• Two-sided design – channels on both faces to hold composite boards securely
• Aluminium construction – light, strong, and corrosion-resistant for BC’s wet climate
• Clean, modern look – square post profile that matches our contemporary fence systems
• Compatible with MapleStar composite systems – works with our boards, channels, and caps from the composite fence supplier Vancouver program
• Low maintenance – no painting or staining required; just occasional washing

Ideal Applications in Metro Vancouver

This two-sided line post is ideal for:

• Neighbour fences where both yards need a finished look on their side
• Strata and townhouse complexes upgrading from old cedar fencing to long-lasting composite; many of our composite fence for strata Vancouver projects rely on these posts for straight perimeter runs
• Fences along laneways and streets where strength and straight lines matter
• Side and back yards that use standard panels like our Standard 6×6 Ft Panels BC

It’s part of the same system we install across Vancouver, Burnaby, Coquitlam, Surrey, Richmond, Langley and the rest of Metro Vancouver.

How to Use This Post in Your Layout

1. Plan your fence line
   Mark all corners, ends, and gate openings. Every straight section between these points usually gets a series of two-sided line posts spaced evenly along the run.
2. Count the line posts
   Use this two-sided post wherever the fence continues straight. Use appropriate corner, end, or gate posts at changes in direction or at openings.
3. Match post length to fence height
   Post length depends on the finished height of your panels and footing depth. If you’re combining this with taller sections or composite panels in different heights, we can size the posts accordingly.
4. Combine with boards and hardware
   Boards slide into the channels on both sides and are finished with matching rails and caps, creating a solid composite privacy fence.

Installation Notes

• Set posts in properly sized concrete footings according to fence height and soil conditions
• Keep posts plumb and in line before the concrete sets to maintain a perfectly straight fence
• Follow spacing recommendations from your MapleStar quote or material takeoff

If you prefer not to DIY, our crew can handle supply and installation alongside your chosen panels, wall cladding, and gates from our fences products lineup.

Ready to Include Two-Sided Posts in Your Composite Fence Order?

If you’re planning a composite fence in Metro Vancouver and want clean, finished faces on both sides of the fence, this two-sided line post is the core structural piece you’ll need.

Call or text MapleStar Fencing at (778) 318-8578
or request a quote through the website and mention that you need two-sided composite fence line posts included with your panels and hardware.

We’ll tie this product into the rest of your composite fencing Vancouver package so you get a complete, installer-ready solution for your project.