Full Set Composite Fence for Metro Vancouver Homes & Townhomes

Our Full Set Composite Fence is a complete privacy fence package designed for Greater Vancouver’s wet, coastal climate. Instead of buying random pieces, you get a matched system of composite boards, aluminium posts, rails, and hardware that fits your yard and local bylaws — planned and supplied by installers with 25+ years’ experience.

Whether you’re replacing a rotten cedar fence in Vancouver or building a clean new barrier around a Burnaby or Surrey townhouse complex, this full set makes it simple to get a long-lasting, modern fence that looks finished from day one.

What’s Included in a “Full Set” Composite Fence

Every project is a bit different, but a typical full set package will include:

• Composite fence boards in your chosen colour and texture

• Aluminium posts (line, corner, and end posts as required)

• Top and bottom rails / channels to lock boards in place

• Base plates or in-ground posts depending on installation method

• All necessary fasteners and hardware sized for the system

• Optional add-ons:

  • Matching composite gates with hardware

  • Solar post caps or flat caps

  • Decorative top sections (open slats, lattice-style, or height transitions)

The exact components are finalized after you send us your rough measurements or book a site visit. We design the layout so you’re not guessing how many posts or panels to order.

Key Benefits of a Composite Fence Set

• True privacy
  Solid panels with no gaps between boards – perfect for backyards, patios, and side yards where you want to block sightlines and reduce traffic noise.

• Built for West Coast weather
  Composite boards and powder-coated posts won’t rot, warp, or splinter in Metro Vancouver rain, damp soil, or coastal wind.

• Fade & stain resistant
  Colour is baked into the boards, so you avoid the constant cycle of sanding, staining, and repainting that comes with wood.

• Low maintenance
  A quick rinse with a garden hose or light soap wash is usually all that’s needed. No yearly painting or sealing.

• Modern, consistent look
  Clean horizontal lines and matching posts give your property a finished, upscale look that pairs well with stucco, Hardie, brick, and composite decking.

• Great for strata & developers
  Ideal for townhouse complexes, small infill developments, and laneway homes that want a long-term, uniform fence solution with minimal future maintenance.

Colour & Height Options

We carry a range of popular composite colours that work with most Metro Vancouver homes, including soft greys, deeper charcoals, and warm wood tones. Available options can include:

• Light and mid greys for a contemporary look

• Charcoal / black-framed combinations for maximum contrast

• Warm walnut / oak-style wood tones for a more natural feel

Common privacy fence heights are in the 5–7 ft range, but we can design:

• Standard backyard privacy fences

• Height step-downs for front yards or along sidewalks

• Taller panels in problem areas (back lanes, commercial neighbours) where bylaws allow

Final height and layout will be designed to respect local city bylaws and property lines in Vancouver, Burnaby, Coquitlam, Surrey, Richmond, and neighbouring municipalities.

How to Order Your Full Set Composite Fence

Step 1 – Share your fence plan
Send us a quick sketch, measurements, or photos of your existing fence line. Note any gates you need (side gate, backyard gate, lane gate).

Step 2 – We design your package
Our team calculates the number of panels, posts, and hardware you need, plus any gates and solar caps, and prepares a clear quote.

Step 3 – Confirm supply or supply & install
You can order supply-only materials, or choose professional installation by Maple Star Fencing across Metro Vancouver.

Step 4 – Delivery & installation
Materials are prepared, delivered, and installed according to the agreed plan. We clean up and walk the fence line with you for final approval.

Installation Notes for Homeowners & Contractors

• Post spacing & footings
  Proper post spacing, footing depth, and concrete volume are critical, especially in areas with softer ground or slopes. We size posts and layout based on your site, not just a generic “one-size fits all” spec.

• Sloped yards
  We can design either a stepped or racked panel layout depending on your grade. This keeps the top line of the fence tidy while minimizing gaps at the bottom.

• Utilities & property lines
  Before digging any post holes, always confirm lot lines and contact BC One Call to locate buried gas, hydro, and communication lines. Our installation crews follow these safety steps on every project.

If you’re a builder, landscaper, or general contractor, our full set composite fence packages save you time: one supplier, matched components, and tech support from installers who know the system.

Typical Uses in Metro Vancouver

• Single-family backyards and side yards

• Lane way fences and parking pads

• Strata / townhouse perimeter and dividing fences

• New small-lot or infill developments

• Noise and privacy screening along busy streets or alleys

Wherever you’d normally use a cedar fence, this composite fences full set gives you a longer-lasting, cleaner alternative with far less maintenance.

Care & Warranty

• No staining or painting required

• Clean with mild soap and water as needed

• Avoid harsh abrasives or metal shovels hitting the boards

• Warranty details are provided with your quote and vary by product line

Ready to Plan Your Fence?

If you’re in Vancouver, Burnaby, Coquitlam, Surrey, Richmond, or anywhere in Metro Vancouver, we can help you design the right Full Set Composite Fence for your property.

👉 Call or text: (778) 318-8578
👉 Or click Request Quote on this page and upload your measurements or photos.

We’ll come back with a clear, installer-level plan – not just a pile of random parts.